Microcement New Zealand for Bathrooms, Floors & Walls
The finish for
Microcement is a premium seamless surface system that creates durable, waterproof finishes for bathrooms, floors, walls, benchtops and commercial interiors.
Suitable for both new builds and renovations, it can be applied over a wide range of substrates, including existing tiles, concrete and plasterboard, delivering a modern, grout-free finish with exceptional durability.
As New Zealand's leading architectural surface specialist, The Finish is the exclusive distributor of Cemher and Novacolor Wall2Floor, two of the world's most advanced microcement systems.
We support architects, designers, builders and homeowners with expert specification advice, technical guidance, samples, a nationwide network of Certified Applicators and comprehensive 10-year warranties, ensuring every project is delivered with confidence from concept to completion.
Stain ResistantInterior & Exterior Engineered For Wet Areas 10-Year WarrantyMicrocement applications
Our systems are engineered for bathrooms, showers, floors, walls, splashbacks, benchtops, joinery and exterior facades, delivering a grout-free, continuous finish that performs under daily use and New Zealand’s demanding conditions.
Seamless from floor to wall. NZ Building Code approved.
Durable, stain-resistant & backed by a 10-year warranty.
Minimal joins. Maximum impact.
UV-resistant and engineered for NZ conditions.
New Zealand’s best microcement systems, supported from specification to installation
Visit our microcement showrooms in Tauranga and Auckland to explore finishes, colours, and textures in person.
Samples available
Specification support
We work with architects and designers to provide microcement specification advice, system recommendations, and technical guidance - so you can specify with confidence.
Our nationwide network of certified microcement installers ensures consistent, high-performance results - connecting you with trusted professionals across New Zealand.
Certified network
Specification information
Application: Wet areas | ceilings | exteriors | flooring | splashbacks & kitchen benches
Thickness: 3-4mm
Texture: Smooth, medium, coarse, floated or patted
Colour: Wide colour range with custom tinting available
Suitable substrates: Concrete | screed | plasterboard (GIB) | cement board | tiles | MDF
Suitable for: Underfloor heating & direct application over existing tiles
Substrate preparation: Substrates must be stable, rigid and properly prepared. Level 4 finish required for walls with no visible fixings. All joints, movement areas and transitions must be correctly detailed and reinforced prior to application.
Microcement colours and textures
From soft neutrals and warm earthy tones to deeper contemporary shades, explore microcement colours and textures to complement your space. Choose a smooth, refined surface or a more textured finish, with hand-applied movement that makes every installation unique.
Microcement stain resistance
A beautiful surface should work for everyday life. Aquapur 70 is a protective sealer used within the Cemher Microne microcement system, with tested resistance to a range of household spills and chemicals.
In testing using ASTM D1308, the surface remained unaffected by coffee, ketchup and water at all tested intervals, up to 24 hours. Mustard caused a slight change after 24 hours, with no loss of hardness.
These results demonstrate the tested system’s resistance to common spills, helping you choose your finish with confidence. Spills should still be cleaned promptly, following our care and maintenance guidance.
-
The supplied report records household chemical resistance testing using ASTM D1308, with covered exposure periods of 1, 4 and 24 hours.
-
Ketchup
Water
Caustic soda
10% bleach
24% Salfuman
Mustard: Unaffected after 1 and 4 hours. A slight change was recorded after 24 hours, with no loss of hardness. Results apply to the tested system under laboratory conditions. They do not mean the surface is stain-proof or that the tested chemicals are suitable for routine cleaning. Follow the recommended care and maintenance instructions.
Start your project with The Finish
Whether you are specifying, pricing or ready to build, we can guide you to the right system and connect you with the right applicator.
Microcement FAQs
-
Microcement is a continuous cement-based coating system applied by hand in multiple layers to create a seamless surface. Unlike paint or decorative plasters, microcement is a technical system engineered for durability, flexibility and long-term performance across bathrooms, floors, interiors and exteriors.
-
Microcement can be applied over a wide range of stable, well-prepared substrates, making it a highly versatile finish for both new builds and renovations.
Common substrates include:
Concrete and cement screeds
Existing tiles (walls and floors)
Plasterboard (GIB) and fibre cement
MDF and timber (in dry areas, with correct preparation)
Rendered or plastered surfaces
The key to a successful microcement application is substrate preparation. Surfaces must be structurally sound, clean, fully cured, and free from movement. In wet areas, appropriate waterproofing systems must be installed prior to application to meet New Zealand Building Code requirements.
For best results, microcement should always be applied by a Certified Applicator who can assess the substrate and specify the correct system.
-
Microcement can be applied to:
• Bathroom walls and showers
• Floors (residential and commercial)
• Kitchen splashbacks
• Benchtops and joinery
• Staircases
• Fireplaces (subject to substrate and heat considerations)
• Exterior facades and outdoor areasIt can be installed over correctly prepared tile, concrete, screed, GIB and other stable substrates.
-
Yes - in many renovation projects, microcement is applied directly over existing tiles.
-
Yes - microcement is fully compatible with underfloor heating systems when correctly specified and installed.
-
When installed correctly by a Certified Applicator over a properly prepared and stable substrate, our microcement is formulated to minimise cracking. Movement joints and structural considerations must always be respected.
-
No. Microcement is not a DIY product. It is a specialist, multi-layer system available exclusively through Certified Applicators to protect the integrity of the finish and warranty.
-
Microcement is a premium, hand-applied surface system, so pricing can vary depending on the scope and complexity of the project.
Factors that influence cost include substrate condition, surface area, detailing, access and the specific system used. While the upfront cost can seem higher than some traditional finishes, microcement offers long-term value through its durability, low maintenance and seamless aesthetic.
For an accurate price, we recommend getting in touch with your plans or project details.
-
At The Finish, we work with a nationwide network of certified and trained applicators. The easiest way to find the right applicator for your project is to get in touch with our team - we’ll connect you with a trusted professional in your area based on your project type and location.

